|
Furnace Tune-up
Includes
|
 |
Adjust thermostat
calibration |
|
Perform CO test and
record readings |
|
Inspect venting for
rust and leakage |
|
Test all safety
controls |
|
Check combustion and
ventilation air |
|
Clean burners and
pilot, adjust for proper combustion |
|
Clean flame sensor
and record flame signal |
|
Check all gas
fittings on valve train for leaks |
|
Clean and flush
condensate lines including pump |
|
Clean heat
exchangers |
|
Remove and clean
blower |
|
Perform temperature
rise on heat exchanger |
|
Clean or replace
standard air filters |
|
Lubricate motors as
required |
